Role of wall putty in painting and benefits

Wall putty is used before painting on the wall or other surfaces. It is made from fine powder and has moisture absorbent qualities. It major ingredients are white cement, polymers and filers for making it smooth and eliminating the need for curing. Different brands of wall putty are available in the market and any one of them can be used before painting. Some brands have two grades of putty, fine grade and coarse grade. The coarse wall putty is the first coast applied on the walls to cover the major patches or undulations. The second grade of fine wall putty is then applied to get smooth paint on the walls.

The number of coating of the wall putty will depend on the condition of the wall or surface. The surface with large undulations and patches may be need more coating then relatively plain or smooth surfaces. Before applying wall putty, the surface should be made free from oil, dust or any particles. If there are Cement Wholesaler in Delhi major patches or fault lines, then the cement paste must be applied to cover those patches and after covering major holes on the surface, wall putty can be applied .The surface or wall should ideally be wetted to provide strong bond to the wall putty. The coating of primer is not required after using wall putty, nor does it require curing.

Wall putty is ideal for decorating exterior and interior walls of houses or buildings. The wall putty can be used on fresh painted walls or old painted walls. But the existing paints should be removed before applying the wall putty. It can be used on walls in homes, offices, residential buildings, malls, showrooms, stadiums, exhibition halls or on any surface before painting,

Benefits of wall putty –

When wall putty is applied on the wall, it becomes part of the plaster. The water resistance property Wall Putty Distributors in Delhi of the wall putty ensures that paint is not coming off, when walls are damp. This gives long life to the paints. Before applying costly paint on the walls, the wall putty gives smooth surface by covering minor lines, cracks and crevices.  The smooth surface gives stunning results when paint is applied on it. It also brings out true color of the applied paint because of white cement in the wall putty. It also reduces the consumption of paint by up to 25 % percent.

Uses of Wall Putty and Prepared of Wall Putty Mixture for Different Applications

The use of wall putty before the paining of the interior or exterior wall of the building is recommended by contractors and interior designers in Delhi. This blog precisely discusses the uses and applications of the wall putty in various paining applications.

For the purpose of providing an ideal base for concrete or cement plastered walls and ceilings, the use of white cement based wall putty is recommended by contractors and is highly demanded in construction industry procured from dependable vendors and sources, the wall putty is appreciated and praised for the purpose of providing alluring beautiful exterior and interior walls.  Available with standardized packaging, the wall putty is damp resistant and is known for its balanced composition and enhanced pot life.

The use of wall putty is recommend by the contractors and interior designers, for the purpose of providing a smooth and impeccable wall finishing for both interior and exterior walls. Wall putty is beneficial for further applications of different types of painting applications. Known for its optimum effectiveness, the wall putty is appreciated for its excellent water repelling properties that systematic prevents flaking of the expensive paints. Processed by using modern equipment and latest at the vendors’ end, the wall putty, due to its white cement constitution, becomes an integral part of the plaster.

How the Wall Putty is prepared for Application?

For the purpose of preparation of excellent consistency of the wall putty, the use of 35-40% water by volume is precisely recommended and required in the pan. The half of the water is precisely mixed with the wall putty and then it is advised to wait for few minutes.

For the purposes of getting the desired consistency, it is advised to mix the remaining qualities of water into the pan with the wall putty mixture. In addition to this, the mixing of the mixture for 10 to 15 is carried out for the purpose of making the wall putty lump-free and uniform paste.

For ensuring optimum effectiveness, the mixture of the wall putty preparation should be used within two hours of its preparation. Procured from some of the best Wall Putty Distributors in Delhi, the wall putty can be mixed by using electric mixers and manually for ensuring optimum consistency and uniform paste.

Wall putty & white Cement Wholesaler in Delhi can be get in touch with for the purpose of purchasing high grade of wall putty and white cement for the purpose of different interior and outside painting applications. 

Preparing the surface for painting and role of wall putty

For smooth painting the surface to be painted must be cleaned thoroughly. Any dust, dirt particle or dent in the surface will not give required finish to the surface.  The first important step in preparing the surface for painting is to remove not only the dust and dirt but also the residual parts of the previous paints.  This cleaning can be done by wire brush or by washing with fast flow of water. If wall or any surface has algae, it should be removed completely. The cracks must be filled with combination of sand and cement. The cracks can also be filled with the use of putty. If there is dampness in the walls, it should be repair before the start of painting. The causes of the dampness may be internal leakage of a pipe, which runs close to the surface. Or it may be the placement of air conditioner duct, which leaks water to walls. Whatever the reason of dampness, it must be addressed before the painting.

In case if the internal or external side of the wall is crumbling, then first step will be to re-plaster the wall.  In plaster is applied on the walls or surface, then it should be properly cured before the use of paint. The plasters are highly absorbent, that is why the paint getting absorbed and giving patches of different shades cannot be ruled out. At least there should be a gap of 3-4 weeks before the paint on re-plaster walls.

Role of wall putty is Wall Putty Distributors in Delhi very important just before the painting. It provides smooth surface for painting by covering the holes, small dents, cracks and other irregularities. One or two coating of wall putty is enough for any surface to become smooth for desired painting finish. After the use of putty, the use of primer gives additional protection to the surface and makes the pain stick to the surface. It also increases the durability of the paint.

Then final painting is done with the choice of paint depending on the preference of the user.  The paint with bio pack will ensure that the growth of algae is stopped. The growth of algae leads to appearance Cement Wholesaler in Delhi of black patches on the wall. For applying the paint, the movement of the brush should be only in one direction back and forth. This gives smooth painting with no visible lines in the painting. The color of painting is often different for external sides and internal walls. The external pant as far as possible should have the qualities to withstand the harsh weather. The paint must not fade soon after applying under strong sun lights.

To maintain clean wall from external side of the home, they should be washed with water after every 4 – 5 months. This removes the dust and pollution from traffic and keeps shining.

Wall Putty And Preparing The Wall Before Painting

Wall putty is a fine powder, which is used to fill the holes, cracks, and dents to make the surface smooth for painting. It is damp resistant and gives smooth finish. Putty is made of cement and sand of holes filling materials.

To get the smooth finish, the surface should be prepared for painting by cleaning the wall or any surface of dust, grease, chalk or residual parts of the last painting. This is done better by scraping the wall with wire brush. Any growth of algae must be removed before painting, by bio wash. This is done by mixing 15 % of bleaching powder in a bucket of water.  This mixture kills growth of algae on walls. Next step is dealing with dampness, which can destroy any paint applied on it. Dampness is generally caused by water leakages from pipers within the walls, some leakage from external water pipes or water running on walls from outside. The source of the water coming on walls or running through walls must be repaired before start of the painting.  To deal with cracks, the putty is applied on cracks. Cracks can damage the paint and create conditions for growth of algae and dampness. That is whey, the filling of cracks with putty, from inside or outside of the wall is essential to perfect painting.

Again if the wall or surface has some loose particles or surface is absorbent, a coat of exterior sealer must be applied. And any surface, which has been applied with freshly plastered must be properly dried or cured before the use of painting. Such surfaces should be cured with water for a month before painting. Then of putty is applied to make the wall even by covering all holes and cracks. The putty should be left to dry before applying primer. The main function of the primer is to give additional protection layer to the surface and make sure that there is better adhesion of the paint on the wall. It also ensures durability of the paint. For smooth painting it is essential that the paint brush should be applied only in one direction either right to left or up and down. The paint for external side of the wall must be selected carefully to give protection to wall from harsh condition of weather. Paint with bio-pack is suitable for external side, as it prevents the growth of algae and green patches.

Cement distributors also keep wall putty with them Cement Distributors in Delhi-NCR. Only small cracks can be filled with wall putty. For bigger cracks on the external side of the wall, the quality cement or mixture of sand with cement must be applied on the cracks.  Wall putties are made with quality raw material and chemical compounds with advanced methodology. Wall Putty Distributors in Delhi is keeping wall putty based on white cement also to give leveling to the uneven surfaces.